ThinkLite Air · ICON ULPA Air Purifier
Bring ULPA particle filtration to the rooms where people meet, learn and work. ICON combines a carbon pre-filter, an enclosed UV treatment chamber and ULPA filters in one freestanding air purifier.
Four finishes. Touchscreen controls. An optional wheeled base.
The filter makes the difference
Small particles deserve a clear explanation. ICON uses ULPA filters for particles as small as 0.1 microns, supported by a carbon pre-filter and an enclosed UV treatment stage.
Understanding HEPA
HEPA stands for high-efficiency particulate air. Its familiar 0.3-micron test size is not a cutoff. HEPA filters can also capture smaller particles.
However, a filter rating is only one part of room air cleaning. Airflow, filter fit and operating speed also matter.
Inside ICON
ULPA stands for ultra-low penetration air. In filter classification tests, ULPA classes allow fewer particles to pass through than HEPA classes.
ICON brings ULPA filtration for particles as small as 0.1 microns into a freestanding unit. Next, see how its filtration stages work together.
Follow the air through ICONInside ICON
ULPA filtration is part of a complete air path. Select a step to see how air enters, moves through the enclosed chamber and returns to your room.
Select a step. Follow the change.
Start at the baseFollow the incoming air toward the carbon pre-filter.
Designed to belong
Choose a finish that belongs in your room.
Whether you prefer a crisp white finish or warm wood tones, keep the same ULPA filtration at the center of your air-cleaning plan.
Ask our team about finish availability and the optional wheeled base.
Choose your ICON
Filtration that fits your routine
Once you choose your finish, plan how ICON will work in the room—from daily controls to the option of moving it between spaces.
Use the built-in touchscreen to turn ICON on and choose a fan level for your room.
Fan speed affects airflow and sound. Choose an operating level that suits your room and air-cleaning plan.
Choose the optional wheeled base to move ICON between spaces. At each location, use a level floor and keep the intake, outlets and walkways clear.
Match filtration with airflow
Start with the amount of air in your room.
ULPA filtration is one part of the plan. Room volume, layout and operating speed also matter. Together, these details help your team choose the right placement and device count.
Discuss your room with usAir changes, in plain language
Keep required outdoor-air ventilation in place. ICON recirculates room air; final equipment selection needs applicable performance data and a review of your space.
Start with your space
Enter your room dimensions. Then compare airflow and sound at five fan settings to plan your ICON setup.
6,000 cubic feet of room volume
Enter your outdoor airflow and circulation target, then estimate your ICON count.
Planning estimate based on airflow, not CADR. Our team can help confirm device count and placement for your space.
Room volume × target ACH ÷ 60 gives target CFM of total air circulation. Subtract credited outdoor airflow, with a minimum gap of zero. Divide by the selected ICON airflow, round up, then add one planning unit.
For meters and m³/h, volume × target gives hourly flow directly. Calculations preserve the same physical quantities when you switch units.
This airflow-only estimate does not calculate contaminant removal or establish standards compliance. The +1 unit is a planning allowance, not a safety guarantee, and remains even when the calculated gap is zero.
Assumes a well-mixed room and applicable airflow at the intended operating speed. Other HVAC recirculation is not credited. Placement, maintenance and operating conditions matter.
Look after your filtration
A clear air path and timely filter care support everyday operation.
Check that furniture and other objects are not blocking the intake or outlets.
Follow the replacement guidance for the carbon pre-filter and ULPA filters. Timing depends on your room and how you use the unit.
Power off and unplug before cleaning or maintenance. Internal UV-chamber work belongs with trained, authorized service personnel.
Plan your ICON installation
Explore filtration, placement and daily care. Then share your room details so we can help you plan the next step.
The current ICON uses ULPA particle filters, alongside a carbon pre-filter and an enclosed UV treatment chamber. ULPA filtration addresses particles as small as 0.1 microns. See how ULPA and HEPA differ, or ask our team for the current product specifications.
Choose the optional wheeled base for mobility. Before moving the unit, switch it off and disconnect the power. At its new location, keep the intake and outlets clear and review the room's airflow needs.
Start with the ICON airflow-only calculator. Enter room dimensions, outdoor-air credit and your project's circulation target. Compare airflow and sound at five fan settings, from 20% to 100%. The estimate uses your selected setting and includes one separate planning unit. Then review device count and placement with our team.
No. ICON cleans and recirculates room air. Keep the building's required ventilation in place; air cleaning and outdoor-air ventilation serve different roles.
Use a stable, level indoor floor with clear space around the intake and outlets. Avoid blocked corners, heat and water, and keep the cord out of walkways. Follow the placement and clearance instructions for your unit.
Filter life depends on the room's contamination and how the unit is used. Follow the replacement guidance and indicators for the installed configuration rather than assuming the same interval for every space.
Yes. Add separate Flair monitoring to follow indoor conditions over time. Then use Airlytics to review supported measurements and trends. Ask our team which monitoring configuration fits your project.
Request the ICON specification sheet through the inquiry form. Our team can help you review dimensions, electrical requirements, airflow, finish options and service needs before you order.
See the bigger picture
Pair air cleaning with separate indoor-air monitoring to follow conditions over time.
Explore the ThinkLite Air system
Build an indoor-air strategy around your space. Explore the monitoring, software and purification solutions that fit your project.
Follow indoor conditions with continuous air-quality monitoring.
Explore Flair Monitor inside HVAC
See air conditions within your building's air-handling system.
Explore In-Duct Flair Understand every site
Bring supported air measurements, trends and reports into one view.
Explore Airlytics Purify from the ceiling
Combine ceiling-mounted air purification and LED lighting.
Explore PuriluxBring ULPA filtration to your space
Share your room details. We'll help you choose an ICON configuration and plan where it belongs.
Your next step
Complete the inquiry form to connect with ThinkLite Air.
Form not displaying? Open the ICON inquiry form in a new tab ↗
© 2026 — ThinkLite. All Right Reserved.